Run the whole shop
from one system.

ShopCore is an ERP for precision machine shops. Quoting through shipping, the people who run the machines, and the AS9100 records that prove it happened.

Built for job shops, not adapted from something else. Cloud or on your own server.

SHOP TRAVELER 48219-7 REV C CUSTOMER QTY DUE MATERIAL Tempest Aero 240 10/14 4140 HT SO24-1187 OP WORK CENTER SET / RUN HR STAMP 10 SAW 0.4 / 0.1 RT 9/24 20 MILL VF-4 1.8 / 0.6 RT 9/25 30 TURN OKUMA 1.2 / 0.4 MB 9/26 40 HEAT TREAT OUTSIDE OUT 9/27 50 DEBURR 0.0 / 0.2 60 FINAL INSPECT 0.0 / 0.3 HEAT LOT CERT FIRST PIECE 8842-B ON FILE ACCEPTED INSPECTED MB 09-26-26
Why shops move

One system instead of five that do not talk.

Most shops we meet run a shop system from the 1990s, a separate HR tool, a whiteboard, and a spreadsheet only one person understands.

Visual EstiTrack Still on FoxPro

DBF files, no vendor future, and a report writer nobody wants to open.

E2 and similar Priced per seat

So half the shop never gets an account, and the data stays on paper.

A separate HR system Two employee lists

Paying twice to keep the same names in sync, badly.

The whiteboard Accurate until wiped

And invisible to anyone not standing in front of it.

What is in it

Eighteen modules. Turn on what your shop runs.

Each one is licensed separately, and none of them is an add-on product bought from another vendor and bolted to the side.

001

Customers

Contacts, terms, and the full history of what you have quoted and shipped them.

002

Quoting

RFQ in, quantity break pricing, numbered and revisioned quotes, won on a customer PO.

003

Parts and BOM

Part master with drawings, programs, CMM reports, and quote history on one screen.

004

Shop orders

Travelers, operations, routing, and where every job stands right now.

005

Production

First piece sign off, floor and wall displays, live status by operation.

006

Scheduling

Load by machine and by cell, using the setup and run times your operators recorded.

007

Machines

Machine inventory, scheduled inspections, and repair history per spindle.

008

Programs and CAM

Check out and check in for CAM files, so two programmers cannot overwrite each other.

009

Document control

Drawings and specs by revision, encrypted at rest, never loose on a share.

010

Quality

Gages and calibration, CMM results, nonconformance and corrective action.

011

Outside services

What is out at heat treat or plating, when it is due back, and who is late.

012

Purchasing

POs, receiving, inventory, and the approved supplier list behind both.

013

Shipping

Packing slips, carriers, and the paperwork that has to travel with the parts.

014

Invoicing

Invoice from what actually shipped, not from what was ordered.

015

Employees

A real HR system. Onboarding, benefits, documents with expirations, hiring.

016

Time clock

Tablet clocks on the floor, breaks, payroll close out, clean export to payroll.

017

Training

Skills matrix, training records, and the material itself, tied to each employee.

018

KPIs and reports

The quarterly numbers you build by hand today, computed as the work happens.

AS9100 and audits

Built so the audit is boring.

Aerospace work means proving what happened, not remembering it. These are part of the system, not a binder somebody maintains on the side.

Approved suppliers

Scored, not guessed

Qualification evidence, certificates on file, and a scorecard computed from real delivery and quality history. Issuing a PO to an unapproved supplier warns you first.

Traceability

Heat and lot, end to end

Carried from receiving through the job to the packing slip, with the certificate attached where an auditor expects to find it.

Calibration

Out of tolerance recall

Gage inventory with due dates, and a failed calibration that tells you which parts were measured with that gage since the last good one.

Audit trail

Who, what, when

Every record change logged, deletions included. Retention runs on a schedule instead of on somebody's memory.

Past the office

It reaches the machines and the door.

On the floor

  • Haas controls report the running part and operation into the status board
  • Tablet time clocks at the entrances, with an offline queue when the network drops
  • Badge printing, with the card registered for door access in the same step
  • Label printers driven directly, no separate label software
  • Wall displays for job status, outside services, and first piece

Where it runs

  • Hosted by us, your shop on its own address with its own encrypted storage
  • Or installed on a server in your building, if your customers require it
  • Same software either way, so the decision is not permanent
  • A small agent connects hosted ShopCore to the machines and printers on your LAN
  • Nightly backups of the database and the documents, verified and visible
Integrations

Most shop systems stop at the office door.

ShopCore hires someone, prints their badge, and that same badge opens the building. One employee record behind all of it, so there is nothing to keep in sync and nothing left behind when they leave.

  1. 01

    They are hired in ShopCore

    The onboarding checklist starts, and a Microsoft 365 account is created for them if the job needs one.

  2. 02

    The badge prints

    Photo, name, employee number, on your card printer. Each card is single use, so a reprint is always a new credential.

  3. 03

    The card registers itself

    At print time the card lands in UniFi Access as a door credential. No tapping it on a reader, no retyping the number into a second system.

  4. 04

    Offboarding closes both

    Terminate the employee and the door credential dies with the login, at the same minute, with the audit trail to show it.

Why this matters at audit

The gap every auditor finds is the person who left in March and whose badge still opens the back door in November. It happens because the HR system, the shop system and the access control system are three products owned by three people.

Here they are one record. The same is true of the time clock: the badge that opens the door is the badge that clocks them in, and both trace back to the employee whose training records and expiring certifications live in the same place.

Microsoft 365

Employees sign in with their work account. New accounts are created from onboarding, and ShopCore sends its mail through Graph from your own mailbox.

Your SIEM

Every staff and customer portal action forwarded to Splunk over HTTP Event Collector, in near real time, with delivery failures shown in Admin rather than swallowed.

UPS and FedEx

Rates and labels from your own carrier accounts, with a test mode so nobody learns the hard way what a live label costs.

Twilio

First piece approvals and rejections texted to whoever submitted them, from your own Twilio number.

Your machines

Haas controls and MTConnect read by a small agent inside your building that polls outward, so nothing on your shop network is exposed to the internet.

Your door hardware

UniFi Access today, through your own console. Credentials are issued and revoked by ShopCore, but the doors stay yours.

Switching

Your twenty years of history comes with you.

The reason shops stay on a system they dislike is the data in it. We import it. Customers, suppliers, the part master, orders, and quote history come across from Visual EstiTrack and E2.

STEP 01

We take your backup

Loaded into an instance that is yours alone, before you commit to anything.

STEP 02

You look at your own shop

Your part numbers, your customers, your history. Not a demo dataset.

STEP 03

One module at a time

Quoting first, then orders and travelers, then the floor. Nobody moves over a weekend.

Plans

Priced by the size of your shop.

Licensed by employee count rather than per seat, so everyone who touches a job can have an account. Modules on top of the plan as you need them.

Tier 1

Core

Small shops getting off spreadsheets
  • Customers and quoting
  • Parts, orders, and travelers
  • Time clock and payroll close out
  • Document storage
  • Email support
Tier 2

Professional

Where most job shops land
  • Everything in Core
  • Full HR and training
  • Purchasing, inventory, shipping
  • Machine monitoring and floor displays
  • Quality and outside services
Tier 3

Enterprise

Aerospace and regulated work
  • Every module, including ones released later
  • AS9100 supplier control and traceability
  • Reports and KPI roll ups
  • On premises option
  • Direct line to the people who build it
Request a demo

Show us your worst job.

No slide deck. Bring a real quote or a real traveler from your shop and we will run it end to end, then answer whatever it raises.

Or reach us directly.
[email protected]

ShopCore is built and supported by Inflight Technology LLC, Hillsborough, New Jersey.

Sign in to your shop

Each shop has its own ShopCore address.

Do not know your address? Ask whoever set up ShopCore at your shop, or ask us.